blue left arrow graphic Back To All News

Manufacturing facility specs: clear height, utilities, and speed to production

October 14, 2026

Share this article

When a manufacturing or biotech operation needs to reach production quickly, the facility decision is rarely about square footage alone. Three specifications tend to shape the initial evaluation: clear height, column spacing, and the real status of utilities in the space being leased. Here is what to look for, and how those questions shaped the planning of Pathway Devens.

Clear height & column spacing

Start with the vertical dimension. “Clear height” is the usable space from the finished floor to the underside of a structural beam. It is not the same as roof height, and the gap between the two can be significant.

For intensive manufacturing use, those numbers matter. Bioreactors, mechanical mezzanines, and other GMP-specific equipment often call for clear heights of 36 feet or more. Column spacing is just as important. Open bays of roughly 40 x 40 feet are a typical minimum requirement for flexible production layouts, because they allow for the production equipment to be arranged around the process rather than around the structure.

What pre-permitted utilities provides

Utilities are where many timelines slip. Pathway Devens was developed with high-capacity utilities built into the campus infrastructure, so tenants aren’t left to arrange basic service or power upgrades after signing a lease. Pre-permitted utilities include gas, water, wastewater and electrical service, and at Pathway Devens, wastewater connects to the municipal sewer system rather than a septic system.

The term also covers the exterior of the building. Pre-permitted exterior utilities refer to designated outdoor areas set aside for bulk gas storage or additional electrical equipment, such as standby power generators, transformers or switching stations. Having those areas identified, approved and constructed in advance removes a common source of delay.

Behind all of this is a simple design principle. The campus was developed specifically to support advanced manufacturing, which means utility capacity is sized for high-demand production rather than general industrial use.

The rest of the due-diligence checklist

Floor loading is easy to overlook when clear height and power dominate the conversation. Manufacturing space typically requires a slab-on-grade capacity of 250 PSF or more.

Loading access affects equipment move-in as much as it affects ongoing operations. Look for at least four tailgate-height docks with dock levelers and one full-size, truck-height dock.

Finally, ask about structural capacity. Suitable structures must be able to easily accommodate added 2nd floor space within the high-bay portion of the building and significant roof loads of heavy HVAC and electrical equipment associated with the production process of an advanced manufacturing operation. Shells without the appropriate structural design will require extensive cost and time to retrofit.

Start From a Predictable Baseline

The fastest path to production is not finding the cheapest shell and planning improvements later. It is identifying a facility where the major infrastructure decisions were made in advance, then building from a predictable baseline.

blue left arrow graphic Back To All News